Shark Brush Roll Indicator Light Not On? A Detailed Fix Guide

Anyone may get annoyed if they find their Shark vacuum brush roll indicator light not on during their routine cleaning tasks.

It’s quite a frustrating thing for householders if their cleaning machines may not work properly and they don’t know how to fix this problem.

In most cases, such matters of Shark vacuum cleaners are not big enough to take any technical support.

Keep reading to get the best DIY solutions if the brush roll of your Shark vacuum cleaner is not responding and make your cleaning lives easier.

Importance of Brush Roll Indicator Light

The shark vacuum brand offers tons of cleaning machines in their upright, robot, and handheld models to satisfy their customers. A brush roll is a crucial gadget in these units for cleaning purposes.

Of course, their consumers are looking for multipurpose vacuums, so it is essential to add the alert of light so that the homeowners use the brush roll of this machine according to their needs.

This indicator light also helps you understand the functions and problems of the brush roll. Of course, when this light is shining in green color, the machine will be working correctly.

But, if it gives you an alert in red color, you are in trouble.

Why Brush Roll Indicator Light is Not Turning On

Shark vacuums are equipped with modern technology and designed to clean any type of surface with minimal time and effort.

These reliable cleaning units are formed with several components; its brush roll is a critical gadget from these parts. The indicator light tells you its progress in different colorways.

Observing this brush roll indicator light is important to power your cleaning process. It would definitely help you to do these cleaning tasks efficiently.

If this light is green, you simply consider that the shark vacuum cleaner works perfectly. But if you see red blinking light or it won’t turn on, you need to check your favorite shark vacuum in different scenarios.

Scenario 1: Incorrect Position of the Power Switch

---

The indicator light won’t turn on if the brush roll switch is in the wrong position. Sometimes, you select the incorrect switch from two different cleaning modes.

The ‘I’ is the suction mode, while ‘II’ represents the brush mode. The shark navigator light falls between these two modes. The shark vacuum machine will act precisely in which way you have selected.

If the shark vacuum is not sucking or the shark lift away brush is not spinning, your favorite vacuum cleaner is toggling between these two modes.

How to Fix it – What Should I Do?

The situation seems so simple to handle. In fact, the only thing you have to consider is the suitable cleaning mode setting.

Before starting your routine cleaning session, make sure that you set up the correct cleaning mode.

If you need to pick the debris and spills from the surface, your switch should be in suction mode but if you want the brush roll spinning, make sure that the indicator light is flashing in the shark brush roll indicator.

Choosing the right power switch mode will surely fix this anomaly!

Scenario 2: Attach Nozzle is Loose

---

Another possible scenario of the shark vacuum roller not working is its attached nozzle. You have to connect this nozzle properly for the smooth functioning of the shark vacuum.

If it loosens up, the powerhead brush will not be spinning and your favorite shark vacuum will stop working.

How to Fix it – What should I Do?

Most homeowners usually overlook this problem and never realize that their gadgets are getting disassembled. This is relatively easy to fix this problem as well.

Check the attached nozzle or any obstruction on its way. Just clear out the blockage to maintain a proper connection between this cleaning unit and the nozzle.

If you are 100% sure that there is no barrier in this way, re-assemble the nozzle properly, and you will see Shark light in green color.

Scenario 3: Shark Vacuum is Overheated

---

Another common reason for shark rotator brush roll not working is its overheating issue. This problem may lead to shark duo clean roller brush not spinning problem as well.

Sometimes, the machine gets too hot, and its gears stop working. Don’t worry, let’s find out its simple solution!

How to Fix it – What Should I Do?

One of the easiest ways to fix this problem is to shut down the machine for some time. If you see the shark vacuum lights in red and the machine is getting hotter, just unplug it immediately.

Let it cool down for a while and remove its dust bin.

You can lay this cleaning unit on a flat surface for 30 to 45 minutes; its temperature will surely decrease, and you can start working with this cleaning gadget again to finish your job.

Scenario 4: Brush Roll is Entirely Blocked

---

Sometimes the debris or heavy spills are trapped in the brush roll, and the power can’t flow in your cleaning unit.

Even if you press the shark duo clean reset button, the shark vacuum red light is still showing. Again, just turn off your shark vacuum and lie it down on any flat surface.

How to Fix it – What Should I Do?

To handle this scenario, you have to clear the blockage for the smooth functioning of the brush roll. Just detach the brush roll from the machine.

The debris or dirt particles should be removed with a small brush or soft bristle. If you see a bundle of wrapped hair, then immediately eliminate it.

You can use scissors or a razor for this purpose but never cut any portion of your cleaning machine interior.

Once you are 100% sure that all the obstructions have been removed, re-attach the brush roll and plug the machine again.

The indicator light will be on to its green state, and the brush roll will start working in the right way.

Scenario 5: Driving Belt May be Broken

---

If you monitor all the scenarios mentioned above and still the shark vacuum brush roll indicator light is not on, check out its belt.

It might be damaged due to excessive use of the shark vacuum machine. The shark vacuum lights are on but won’t start because of this belt broken issue.

How to Fix it – What Should I Do?

It is not suggested to repair this driving belt; you can call the professionals for your shark vacuum manufacturer and install a new driving belt.

Some manufacturers may offer repair services for this vacuum cleaner belt because they are offering a lifetime warranty for this belt.

Still, it is highly recommended to replace this belt instead of the repair option. After installing the new driving belt, you can do a test drive to ensure the belt is moving correctly.

Important Points to Note

I hope you will handle all shark rotator professional troubleshooting scenarios.

Whether you are dealing with shark vacuum suction problems or your cordless shark vacuum keeps shutting off due to any obstruction, you can deal with every situation with the best possible solution.

Still, never miss the following valuable tips to act like a real shark vacuum pro under challenging scenarios:

• Wash the dirt chamber with soapy water after every week.
• You can occasionally inspect the dust bin, filter, hose, and other components for any blockage or damage.
• If you are not using a shark vacuum, ensure that it is unplugged.
• Instantly remove the debris or hair trapped in the brush roll as you notice.
• Take special care of the filters; use warm water to wash these filters regularly.

The Bottom Line

Here, you will find almost all possible ways that the shark vacuum brush roll indicator light is not on.

After reading some of the major scenarios in the brush roll of your favorite shark vacuum, you will get a basic understanding.

If you carefully learn these causes and their solution, you can easily handle all types of anomalies in your green shark vacuum.

The maintenance and replacement issues of this gadget can also be resolved quickly. This short guide will explain some popular scenarios with their causes and optimal solution.

Considering these scenarios, you can improve your cleaning performance with this useful cleaning unit. Always observe the indicator light of the brush roll and behave accordingly. Good Luck!