Your shower drain stopper might get slow down with sticky hair and soap scum. Our expert team cleaning will guide you to remove the shower drain cover with minimal tools.
A standard bathroom drain cover is connected with screws that need to be removed to clear all the blockages. It is a permanent method to remove hair from the shower drain and clear all the soapy and dirty water.
You will never need any expensive shower drain removal tool for this job, in fact, the process of removing the drain stopper just takes five minutes.
Stay tuned and continue reading this short article for proven guidelines!
At a Glance – How to Remove Shower Drain Cover
- You can unclog your shower drain cover by lubricating it from its edges. Further, if you find screws, remove them from the drain cover.
- There might be a chance that it is still not loosened up from its position, then use a needle nose to release it from its surface.
- Now clean this drain cover with soapy water; replace it with the newer one if you think it can’t be washed or still creates obstructions.
Table of Contents
Removing Shower Drain Cover – 5 Easy Steps
This job seems quite straightforward for some beginner DIYers. It’s almost true, but you need to follow all the instructions given in this guide in proper sequence.
You may notice that there are unlimited types of shower drain covers and your bathtub drain won’t unscrew if you don’t understand the exact technique.
Here you will get the most simplest and productive method of shower drain cover replacement and you will be able to pull hair out of the drain easily without any drainage and plumbing cover.
Let’s get started!
Step 1. Remove Any Clogs
It’s time to bring your drain snake into the bathroom to replace the shower drain cover. It is better to unclog your drain before eliminating it.
This step is necessary because if you remove the drain without unclogging it then the fixture might get damaged. Now insert the drain snake and try to figure out all the blockage.
If you see only sticky hair then it is easy to pull out but if you have never done this job for so many weeks then you might notice heavy obstruction in the shower drain plate.
It is better to use a homemade cleaning solution made with vinegar and hot water to clear this blockage. It will clear all the barriers in your shower stainer cover.
Step 2. Lubricate the Drain
Now you have to lubricate the drain with any cleaning solution.
You have the option of using a commercial cleaner to clean the shower drain grate but if you have baking soda and vinegar in your kitchen then you can mix these two ingredients with hot water to make a homemade cleaning solution.
Never try to use any greasy ingredient like cooking oil! It will add more beauty to these messes. Just pour this blockage with hot water, vinegar, and baking soda.
This homemade cleaning solution requires 10 minutes to treat all types of muddles effectively.
Step 3. Remove Any Screws
Now you can see the screws of your plastic shower drain cover. You can use a flathead screwdriver for shower drain removal.
Unplug the screws slowly in an anticlockwise direction to remove them. Must notice this process carefully; if the screw falls in the drain, then it is not possible to get it again.
So, remove this screw sensibly till finished.
Step 4. Loosen the Drain
Next! The needle nose pliers can work for you now. Apply these needles to the opposite side of the drain and loosen it till the end.
You have to do this phase with gentle hands. Never try to force this situation; it might draw scratches on the surface of the drain.
If you feel any hurdle then instead of trying to force it, apply step 2 again and leave the lubricate for the next 10 minutes again. Once the drain gets softer, it will be easy to unscrew it.
Step 5. Take the Shower Drain Out
Now pull the drain in an upward direction and take the shower drain screen out. You might face some blockage in its way but after lubricating it two or three times, this step will become easy.
If you are looking to repair this existing drain, then clean it with hot water. There might be some rust inside this drain if you never clean it in the last month or so.
You can use soapy water to remove all dirty stuff with this drain. If you want to replace this drain with a new one then just remove the older drain and install the newer one.
Shower Drain Replacement: Other Methods
You will find plenty of other techniques to remove the shower drain cover. If you are still stuck and not able to remove the shower drain screen with the traditional tool then you can use a plunger.
The process of plunging the clog requires little energy to clear all the heavy obstructions in your drain hole.
You can use plastic hook drain cleaners to eliminate all types of messes in your bathtub drain. Must wear rubber gloves and goggles to protect yourself from getting dirtier.
This method can also work well for you if you never do any cleaning sessions with your bathtub. If you feel sticky hair and strong soapy scum then you can use any commercial chemical drain cleaner.
It will dissolve all the wet stains from the drain. Must remember that you should pour your drain hole with hot water after applying any toxic drain cleaners in your bathtub.
It will clear all the odor of this cleaning solution from the drain.
FAQs – Frequently Asked Questions
How Do You Remove a Square Shower Drain Cover Without Screws?
If you have installed a square shower drain in your bathroom then you will be happy to know that it is fixed without any screws.
You just need to turn it in a counterclockwise direction to easily remove it. If you feel any difficulty in turning it on then you can use a wrench to eliminate this stopper.
Do Shower Drain Covers Come Off?
You can straightaway pull out and unscrew the DIY drain cover but if the drain cover is installed with screws then you need a screwdriver to comfortably remove it and detach it from a bathtub.
How Do You Remove the Twist from A Shower Drain Cover?
If you want to remove the twist from any shower drain cover then you have to lock the drain cover with channel lock players. It will help you to effectively remove the twist from its drain cover.
How Do You Open a Drain Cover?
Initially, you have to investigate the type of your drain cover. If it is a screwless drain cover then you can easily open it with your hand or wrench.
But if it is a screw drain cover then you need a screwdriver of the same type to efficiently do this task.
How Do You Remove a Drain Grate?
You need a strong needle or any knife to remove a drain grate. It is simple enough to do this job within seconds but you should know the right direction to efficiently remove this drain grate.
How Do You Remove a Shower Drain Cover without Tools?
The process of removing and unclogging shower drains doesn’t require any special tool. You just need concentration and proper guidelines to do this job efficiently.
How Do You Open a Square Shower Drain Cover?
Most of the square shower drain covers don’t contain any screws. It is easy to pull it out from the tub for any cleaning session. The installation process of the existing square drain cover is also simple enough.
How Do You Lift a Drain Cover?
The bathroom drain covers can be easily lifted without special shower drain tools. You can plug it out with a knife or any hard needle for removing the tub drain.
Wrap It Up
I hope you never need any plumbing service now to remove the shower drain cover. You can also bring a shower drain hair catcher to protect sticky hair hidden underneath drain covers.
If you feel any rust in your drain cover then you can apply caulk before installing it again. It will increase the lifespan of the shower stain cover.
Pouring all the messes in your drain hole with a homemade solution is more effective than draining an expensive commercial cleaning solution.
The homemade cleaner is more effective for in-depth unclogging and cleaning of drain holes.
Take a minimal risk of applying this method to remove the shower drain cover and inform me of your experience in the comments section!