Let’s find out the way of choosing a perfect tub spout height. This guide will help you to determine the standard spots of this bathroom fixture so that you can utilize this facility comfortably.
You will notice different formats of the bathtub, and the showerhead can be fixed according to this tub type. Although the standard height is around 4 inches for a freestanding type, it is not easy to find the right end of your tub for this fitting.
There are some other factors too which should be considered to install the tub spout accurately. Read on to learn all these key aspects of picking the standard height of your tub spout.
Table of Contents
- How to Choose the Right Tub Spout Height?
- Factors to Consider for the Right Height of a Tub Spout
- How Far Should the Spout Be from the Tub?
- Choosing the Standard Height for the Tub Filler
- Location of these Bathroom Fixtures
- How to Attach a Shower Head to Any Bathtub?
- FAQs – Frequently Asked Questions
- Final Thoughts
How to Choose the Right Tub Spout Height?
The tub spout should be closer to your reach so that you never feel any difficulty. The variety of bathtub formats will make it tough for professional plumbers and homeowners to decide the exact spot for this bathroom fixture.
The most important thing here is to provide a convenient height for the tub spout, so you have full control over it. Moreover, a perfect height will not only ease your way but also displays an overall aesthetic look of the entire bathroom.
Factors to Consider for the Right Height of a Tub Spout
If you already know how to install a tub spout, you also need to learn about the standard height of a tub. Obviously, plenty of confusion and queries come to your mind to figure out the tub spout height and the standard shower valve height.
It is the feeling that you must learn about the standard height of a tub spout. Once you know the right height for these fixtures, you can pick a perfect height for any bathtub in one go.
However, choosing the correct shower faucet height is not art. You have to consider a few factors to determine the tub height standard, which are:
1. Distance from Floor and Wall
You must know that your tub spout shouldn’t be too close to the wall. Even you can’t make it too short because it will also discomfort you.
Therefore, you have to choose a perfect shower valve height from the floor and wall as per your convenience.
2. Location of a Tub Filler
The tub filler should also be placed at the right spot so it will never poke you at any stage. This filler is the major cause of most accidents happening in the bathroom.
Therefore, you should decide its location very precisely for your comfortability.
3. Central Fixtures
The showerhead, spout, valve, and other tub fixtures should be positioned at the center of your bathtub. This central fitting will help you to utilize your bathtub with all the facilities.
You can create a backsplash on the side of your bathtub or any other fancy idea for your comfort.
4. Tub Filler Height
You also have to decide about the height of the tub filler. If you fix it too high, then there is a certain chance that the water will splash out and smash your tub or floor.
If the rate of water flow is quick, the situation will worsen. So, you must also choose the right height of your tub filler.
5. Usage of Spout
Finally, you need to decide about the usage of your tub spout. Whether you want to use this spout with your shower or need its connection with the bath, you must know the exact usage of the tub spout. It will help you to operate the tub spout in the right way.
How Far Should the Spout Be from the Tub?
Now, let’s discuss the most important concern about a perfect tub spout height. The most important tip you must know is to measure it from the rim of the tub. In general, this height is precisely 4 inches above this location.
This distance can go up to 12 inches or even more, as per your preference. If you ask about the shower head, it can be at least 72 to 80 inches above your floor surface.
This arrangement will display an aesthetic look and adds beauty to the entire bathroom. It’s a great idea to create a backsplash at any corner of your luxurious bathtub or any other location for your convenience.
This ultimate distance of the tub spout or the bathtub faucet height can be chosen as per the preference of householders. Any skillful plumber can recommend a perfect height well-matched with other bathroom accessories.
It looks so fantastic to utilize these facilities during your relaxed bath time. Whether you want to learn this tub valve height or need the tub spout under your fingertips, you can opt for our height figures for a perfect fitting.
Choosing the Standard Height for the Tub Filler
You must know the standard height for your tub filler. After deciding the tub shower valve height, you now have to determine the standard length of a tub filler. Some homeowners ignore this issue or don’t know the importance of this utility.
However, once you regulate your filler and find the perfect spot according to your bathtub type, it will become convenient for you to facilitate yourself from this utility. To figure out the exact spot, you need to learn the following two scenarios of your tub filler:
Attached Filler with a Faucet
In most cases, you will notice that a tub filler and a faucet are attached. If facing the same situation, you should place this utility at least 2 inches above your tub rim at any corner. Also, ensure a sufficient gap between the tub and this filler to prevent mishaps.
Backflow accidents are usually happening due to this tub filler. Also, ensure that this filler is not placed too close to the tub because the contaminated waters sometimes flow back into this tub filler and cause damage.
Combined Filler with a Shower
Secondly, you can get a combined filler with a shower. If the faucet control is also not attached to the filler, you should put your tub filler handle at least 12 to 18 inches above the corner of your bathtub.
You can easily access the faucet for better control and get the maximum benefit from your tub filler.
Location of these Bathroom Fixtures
It is so important to choose the right location for these bathroom fixtures. You have to decide on a precise spot to install the tub spout and choose a standard height for the shower valve to utilize this facility in multiple ways.
Every homeowner or family is looking for these bathroom fixtures under their fingertips to spend a relaxed time in their tub. Therefore, all these fittings should be located at an accurate or convenient height.
The format of your bathtub matters a lot as well. You have to fix the spout according to the type and height of y our bathtub. You have to ensure these key factors and install them according to the height of the standard bathtub.
To make things clearer to you, let’s me show you two formats of a bathtub:
The freestanding type of bathroom tub is quite popular and works in a completely different scenario. As the water from the tub will not fall on the floor surface, you should install this tub spout on the lower end.
It is easy to access the spout from this spot. You also have the option to put this spout in the center, near the wall, for better control.
The enclosed tubs are surrounded by walls. You can choose any side of this tub for your spout and other fixtures. However, it is better to install the spout in the middle of the first end of the tub.
You can also choose the second end for more luxurious results, depending on the householders’ preference for which side they want to go.
How to Attach a Shower Head to Any Bathtub?
Attaching any showerhead to your bathtub is another DIY hack homeowners want. You must know how to attach this shower head and its right spot. Now, you can install the showerhead with your bathroom tub in two different ways, which are:
1. Using a Diverter
This one is the easiest method to add a showerhead in the nearby location with your bathtub. If you have already installed any showerhead, you have to remove this existing spout and swap it with your fancy diverter.
2. Install a New Format for Your Showerhead
You may need plumbing assistance to install the setup of your showerhead. It is a complicated task because you might need to crack your concrete bathroom floor and wall to fix a new showerhead.
Must remember that this task is not for DIYers; you have to arrange a skillful plumber for this task.
FAQs – Frequently Asked Questions
How High Above the Tub Should Tub Spout Be?
You must fix the spout at least two inches above your tub rim. If you want to install the shower, its faucet should be twelve inches above the rim. You can fix this shower heat by about 18 inches per your preference.
You can maintain a standard tub height with these figures; still, you can give a distance to these fittings according to your choice.
What is the Standard Height for a Tub Valve?
The valve must connect the bath tap and the shower, so it must be at least 28 inches high to utilize both these facilities. You can consider a 48-inch height when installing this valve for shower stalls.
The distance between the tub spout and valve also depends on the householders’ preference.
How High Should the Tub Spout be Above Freestanding?
Generally, you can’t fix the tub spout lower than 4 inches minimum from your tub’s rim. In the case of freestanding, you can locate this spout from 3 to 6 inches to utilize it perfectly.
You have to measure this distance from the rim of your tub and fix the tub spout in its right spot.
How Far Should a Tub Spout Stick Out into the Tub?
In most cases, the faucet and spout are combined. This setup should be at least two inches above your tub rim to utilize the tub spout comfortably. You can also choose any of your preferred heights for this tub spout.
Where Do You Put a Tub Spout?
You must put a tub spout in an accurate place with the right fittings. Every consumer wants to control all the operations of their bathtub under their fingertips, so it should be located conveniently.
Moreover, you should fix them with proper caulking, so there is no leakage issue in any of these fittings.
Some important factors can determine the standard location of a tub spout. It is so important to install the tub spout at a perfect height. You have to determine the exact spot of these bathroom fixtures according to the format of your bathtub.
You must consider all these important elements to install the spout in the correct position. A perfect tub spout installation will give an aesthetic look to the overall bathroom and is a great decorative phase to be taken.
You can prevent slippery accidents and improve the inclusive design of your bathroom. Must try our recommended steps of installing the tub spout at once and show me your results in the comments section here: