The Right Way to Vacuum an In Ground Pool

If you can’t afford an automatic pool cleaner and thinking about how to vacuum an inground pool in a manual way? Must read this interesting guide to do this task with a DIY attitude.

Don’t think about this task; It’s just a little work! You need to follow essential steps in the right sequence to vacuum your inground pool. It is just like cutting the grass in your yard.

To remove all the debris and dirt and balance the water of your inground pool, follow the instructions given in this short article in the given order.

Quick Way to Vacuum An In-Ground Pool

1. Assemble the vacuum in the right order.
2. Attach the vacuum hose to the skimmer of the cleaner
3. Regulate the filter valve and its setting as ‘waste.’ Balance the water of your inground pool.
4. Now start moving the vacuum in your inground pool in linear form and trap all the debris. Repeat this setup in all portions and clear every dirt particle.
5. Finally, disconnect the vacuum and do a cleanup inside the pool. Use a scrubber to brush the pool walls and clean them with fresh water to remove all the messes.

Vacuuming Your In-Ground Pool

Vacuuming the inground pool requires very little effort but needs to be systematic all the way. It’s a great exercise to remove all the debris from the water pool. Of course, you need neat and tidy water even if you just pass the spring days.

This process will be more effective after any heavy storm or rainy weekend. You can do this task after a week or so but if you notice any mold or grime growth in your lovely pool then must treat these substances and stop them from further growth.

The best possible way is to clean your inground pool with an ideal vacuum to done this job efficiently.

Equipment Required

Before starting work on this cleaning job, you must have the following gears in your bucket:

Telescopic pole



Pool vacuum hose



Skin vac or vacuum plate



Pool brush

Manual In-Ground Pool Vacuuming Guide – 5 Steps

There is a chance that you are still confused about how to use a pool vacuum or how to hook up a pool vacuum.

I have prepared the five most straightforward steps to answer these two critical questions. Just sleeve up and get ready to vacuum an inground pool on your own.

Assemble Your Pool Vacuum

---

Just pick all the equipment mentioned above and assemble them in the right order. You can quickly assemble all the gadgets of this manual above-ground pool cleaner.

For a quick finish, fix the vacuum head to the pole of telescoping, which can be easily snapped.

Connect the Vacuum Hose

---

Now take the vacuum hose; attach the vacuum head to its tail end and skimmer to the other end of your hose with the help of a vacuum plate. Initially, you have to take the skimmer basket off and then go forward.

Here I am mentioning another pro tip!

Before connecting the pool vacuum hose to your skimmer, just blow the air from the hose to hold the hose up. You will no longer watch any air bubble approaching from the vacuum hose.

Choose Your Filter Valve Setting

---

Let’s move on quickly!

Now you have to adjust your multiport valve filter as a traditional filter. If you have more considerable debris and this filter can’t handle a more significant amount of dirt, you can set this setting of this filter as “waste.”

Never worry about the water level of your pool! It might drop to some extent or go to the drain. You have to arrange a steady stream of new fresh water and put it in your pool.

It will increase the water level of your collection, and you can enjoy the fresh cool water at an appropriate level.

Suction Power

---

Now start moving the vacuum on a rug in linear form. Never go too fast. You have to stir up the dirt so that your pool vacuum can suck all the debris quickly.

If you still notice significant number of debris or dirt particles in your inground pool, repeat all the cleaning steps mentioned- above. Make it 100% sure that all the dirt particles have entirely been removed from your pool.

A Final Cleanup

---

The most crucial step is disconnecting the vacuum and changing the filter settings. It will clean up the skimmer. You may have a quick backwash to vacuum the head and skimmer. If you have any sturdy scrubber, it will be good.

You can brush the pool floor and sides with a scrubber. The telescoping pole can also be touched with gentle hands. This quick backwash will ease your job next time.

A Video Guide (How to Vacuum In-Ground Pool)

If you are still confused about vacuuming your pool then have a look at the detailed video below. It will clear all of your confusion about cleaning an inground pool using a vacuum.

After Vacuuming Your Pool

You have completed the process of cleaning your pool with the vacuum. Now it’s time to use the pump strainer basket and backwash it again. It would help if you never dreaded the vacuum head. You can do this task with your hands; just a little effort is required.

Now think about how to vacuum an inground pool again with fresh water? It’s important to clean your bathtub or inground pool for a better water experience. Always take care of these in order to enjoy the sunlight.

You can now confirm the pool water level after completing all the steps mentioned above. Furthermore, you can balance the water level according to your preference. If you have kids at your home or any pets, you need to lower this level. For adults, this water level depends on their height.

Conclusion

Just remember one thing here about vacuum an inground pool, never rush up to finish this job quickly. It will spread all the remaining debris in your pool. The process of cleaning the inground pool needs to be done carefully.

If you try to hurry up this task, you may increase your own work. You need to follow the steps mentioned in this interesting guide and complete this job perfectly within a couple of hours.

If you wish for neat water in your inground pool, it is a great idea to do this cleaning job once a week or after any windy storm.