Do you want to freshen up your bathroom by replacing its old vanity? For this purpose, there are many options but a DIY wood bathroom countertop works well if done properly.
A bathroom counter is the most important element if you are looking for a large-scale bathroom makeover or want to refresh your old bathroom vanity.
Purchasing a natural wood bathroom vanity and installing it can be a costly project so many homeowners decide to DIY it. So, you will be spending less money by doing it yourself.
In this article, we will discuss the top 10 beautiful wood bathroom countertop ideas.
10 Beautiful DIY Wood Bathroom Countertop Ideas
1. Building and Protecting Wood Vanity Top
Spending less on a project doesn’t mean that you don’t make it stylish. In this idea, you will know that you can have style by investing less money and you can achieve a spa-style in your bathroom through DIYing.
The tools and materials that you will need to build and protect the wood vanity top are:
- Nail gun
- Construction adhesive
- Scrape wood
- Circular saw or table saw
- Sealer and Finish
- Paint thinner
- Plywood 1/2
- Miter saw
- Solid wood board ¾
- Woods screws of the sizes 1 and 1 ¼
- Finishing nails
- Bristle brush
These tools and materials are used in almost all the ideas of the wooden countertop building because in every method you need the same tools to cut the wood pieces. And to protect the wood surface from moisture damage you will need high-quality sealant.
You can also rent the cutters that will be required during the countertop making because buying them will make the project too costly. So, we have to spend less to make the project affordable for everyone.
The bathroom is the most humid place in a house so it’s very important to protect your wooden vanity from the damage of moisture. If you don’t allow your kids to go to the wooden countertop, even then spills and moisture will fall onto it.
It becomes difficult to prevent water from falling onto the vanity. Using a high-quality sealer to protect your vanity will keep it long-lasting for many years and you can reuse the countertop again.
Waterlox sealers and finishes work best in protecting the wood because they do not just make a coat over it but penetrate the surface of the wood. Adding wooden countertops will add warmth and increase the beauty of your bathroom by adding a traditional touch to your space.
2. Making Simple Single Wooden Bathroom Sink
This is a great idea to build a wooden bathroom sink and protect it by applying finish. First, build the vanity of the sink by using many wood boards. You will be using different tools for this purpose to cut the wood pieces.
Sanding is an important thing to make the boards smooth and flat. You can use any waterproof paint on your vanity if you don’t like the wooden look in your bathroom.
Or you can simply give a powerful finish to the surfaces to make them water-resistant because the bathroom is a highly humid place and wood will be ruined with water.
3. DIY Plywood Countertop
For homeowners who are interested to install a rustic plywood sink and countertop, this is a great idea for them. You will not spend more than $200 on this project and it will complete in only two days.
Only two sheets of plywood are enough for this vanity, so it is so mind-blowing idea. In this sink, a strange effect will be given to the plywood to make a beautiful design.
Lay the plywood sheet on a flat surface and mark the sink size on your plywood sheet and cut it using a black and decker saw. To make a unique design on the sink, cut ten pieces of plywood sheets larger than the sink size.
Now use a pencil to mark the size of the sink on the boards. After marking, cut all these pieces in such a way that the hole of the first board should be the smallest of all.
The second board’s hole should be larger than the first one, the third one’s hole should be larger than the second one, and so on. Hence, the hole of the tenth piece should be the largest of all.
Put all the pieces on each other like the smallest hole’s board should come first, then put the piece with the larger hole and the largest hole’s board should come on the top.
So, the strange design in the vanity will make your bathroom look so unique and attractive. After completing the design, sand the surface to make some edges smooth and use a high-quality sealant to protect the countertop from moisture damage.
4. Butcher Block Bathroom Vanity
You can change the look of your bathroom by upgrading it with a rustic-style butcher block. This unique style is achieved by cutting the pieces of wood and sanding them to make the pieces smooth. Then gluing them and firmly fixing them together.
However, it is important to leave them overnight so that the glue is hardened completely. Sand the pieces again to make sure all the surface is smooth and flat. While sanding the wood, make sure you are moving the sander constantly and it should not be stopped at different places.
Now cut the hole for your sink but remember to make the hole in the right place so that the spills and splashes don’t fall on the wood every time. First drill the corners of the hole the cut the straight lines with a circular saw.
Finishing the countertop is a very important step because moisture will soak into the wood and it will be damaged.
5. DIY Wood Bathroom Countertop with Herringbone Patterns
This project needs 3 – 4 days to complete so you will need a break from your daily routine. However, this is an easy project which anyone can do and require a little amount of money.
This design is for all herringbone lovers which adds warmth to your space. The things that you will need for this project are:
- Miter saw
- Finish and Sealer
- Circular saw
- Stain – As you like
- Electric sander
- Wood glue
- Pine boards
First of all, you have to cut the sheet of plywood to the size which is required. You have to mark the mid of the sheet which will be the guide for you when you place the herringbone design on it.
Cut and make the design of the pine boards just like the herringbone design. Now apply glue to the sheet and paste the pine board pieces on it.
6. DIY Reclaimed Wood Countertop
The best thing about DIYing a project is that you spend very low and get more gorgeous and convenient things for you. This project will cost you nothing because you will be spending nothing to complete this.
When the wood pieces are cut neatly and a good-looking stain is given to them, it gives fantastic results. If your old vanity is not in bad condition, you only need to cut the parts which look annoying to you. Remove the broken countertop of the vanity.
Cut all the pieces of reclaimed wood to the size of the vanity and sand it properly. After preparing the wood, paste them onto place using glue and nails. When you have finished the gluing and nailing of the boards, make sure you have sanded them well to make their surface smooth and flat.
7. Solid Wood Countertop under $50
This is a low-cost project which will cost only $50 and in this idea, we will be using 2 10-foot long boards which we have cut using a table saw and sanded with a sander to make a countertop.
You will need six board pieces for this purpose. connect all these boards with each other using glue and screws. After building the countertops, stain the wood with any shade you like and protect it with a strong polyurethane coating.
Now use screws to attach the countertop to the base of the vanity using a drill machine. It will take about a week to complete this project but it’s very cost-effective and you will get amazing results.
8. Beautiful Wood Countertops in the Farmhouse Bathroom
The red countertop and brass faucet really make a look like a farmhouse bathroom. In this project, pine wood boards will be used to make the vanity top which will cost around $35 – $40.
So the total expense on this project becomes nearly $250 such as sink, faucet, and wood countertop. First of all, remove the old counter from the vanity and cut all the pieces of wood to start making the project.
In this countertop, a back will also be made to make this design unique. So, cut the wood pieces, sand them, and connect them together.
The look of pine wood is so beautiful that staining it is not necessary so you can just give it any protective finish to protect to wood from moisture damage.
9. Building a Wooden Countertop
You can start with rough-sawn lumber to start this project and get a gorgeous look of maple wood. However, using dimensional lumber will make your project quicker and easier.
In this project, we will be using rough-sawn maple pieces but you can use any type of wood you like such as cherry, walnut, oak, mahogany, and teak. Cut the size of the maple pieces to get 4” thick, 10” wide, and 6’ tall boards.
There are many knots and twists in these wood lumbers, so they make the wood beautiful but also difficult to cut. Use a table saw to cut them, it will take some time because of the hardness of the wood.
Now join all the wood pieces together to make a countertop. After connecting them use a sander to sand the boards and make the surface smooth.
Make sure there is no unevenness on the surface. After preparing the vanity top, protection of the wood is the necessary step which you can get by finishing the surface.
10. Gorgeous Wood Countertops
Wood countertops make your space impressively attractive and bring coziness to your bathroom. There are endless designs that you can make and every design have its own features and attraction.
Many homeowners are afraid of using wood in the humid areas of their houses but if you protect them properly and with appropriate maintenance, they can be in good condition for years.
The advantage of using wood in your countertop is that it will make your project low cost because if you use marble, granite, or tile they are too much costly. So you can use it on a low budget.
It has another advantage that it is easily available at any local store. You can also use any old wood pieces available at your home or any old wooden door.
So, after giving a beautiful and protective finish to the wood counter, you will completely change its look and will make the design fantastic.
FAQs – Frequently Asked Questions
There are some questions that people ask related to DIY wood bathroom countertop.
Can You Build Bathroom Countertop Using Wood?
A kitchen or bathroom is the most humid place in a house so whenever you install wooden countertops, you must protect them from moisture damage. A polyurethane finish will seal the surface and will protect the surface from damage.
Which Wood is Best for DIY Wood Bathroom Countertop?
Maple, oak, and cherry are the best wood options that you can use to build bathroom countertops. These options are recommended because they are reasonable and easy to cut.
They also accept paints and stains well, so they are great for making a wonderful change in your bathroom.
How to Build a Homemade Countertop?
You can easily make a wooden countertop at home if you have the right tools and materials. To make the project cost-effective, use any old wood laying at your home or you can buy them from local stores which will cost you less.
Measure your countertop’s area and cut the wood pieces according to it. Join all the pieces using glue and screws and make the surface of the wood pieces smooth using a sander. Now, stain and finish the surface.
How to Protect Wood Countertop from Moisture?
Clear Penetrating Epoxy Sealer (CPES) is perfect for a wooden countertop. After sealing it with a layer of CPES, two coats of marine varnish provide 100% protection against moisture.
These layers do not make thick films and protect the surfaces but it’s strongly recommended to wipe any standing water on the counter for safety.
How to Make the Wood Countertop Water-Resistant?
Food-safe natural oil or hard wax finish provides ideal protection against moisture. They don’t add any toxins, flavors, or scents to your food.
Take any clean and lint-free cotton cloth and put a generous amount of Interbuild Hardwax wood oil, linseed oil, tong oil, or mineral oil and wipe the surface with it.
There are many DIY wood bathroom countertop ideas for bathrooms and some of them you have read in this article. Here, all the necessary details are given, so you can easily transform your bathroom into a beautiful place by saving some of your money.
In all the projects to make the wooden countertops make sure you have the right tools and materials available with yours, especially woodcutters. It’s better to get them for rent instead of spending money on purchasing them.
Sanding is also important to make the surface smooth and finishing is the most important step of all because it protects the surface from moisture damage and the bathroom is an extremely humid place.